Cadillock innovative technologies Cadillock innovative technologies
Special model for classic cars: </br> battery monitor with integrated anti-theft device

Special model for classic cars:
battery monitor with integrated anti-theft device

  • Protects against a complete discharge of the car battery and thus against battery breakdowns
  • Interrupts the power supply if the charge level of the battery is dangerously low
  • Anti-theft protection caused by a complete interruption of the battery power supply
  • Keeps enough energy in reserve to start the engine at any time
  • Easy to use – installation on the car battery in only 3 assembly steps
  • Also suitable when the car is parked for longer periods
  • Increases the lifespan of the battery
  • Extremely low power consumption (only 3 ~ 7 mA)
  • versandkostenfrei
  • für Deutschland & Österreich
aktuell nicht lieferbar

Short description

With its patented digital monitoring system, the Cadillock Classic constantly checks the minimum voltage level that the vehicle battery must maintain to be able to start the car. As soon as the voltage has fallen short of 11.9 V for a period of more than 60 seconds, the Cadillock Classic automatically interrupts the vehicle power supply.

Thus the Cadillock Classic protects your vehicle's battery from falling to a dangerously low state of charge or even being completely discharged, and reserves the necessary battery energy for an engine emergency start. Thus the Cadillock Classic prevents your vehicle not being able to be started due to a flat battery. 

The anti-theft device is activated via the remote control. The Cadillock Classic cuts off the entire battery power supply and thus makes it impossible to start the car. 

By interrupting the power supply by the Cadillock Classic the status of the car battery is very similar to the state that would be achieved by disconnecting the car battery. In other words, not even the slightest amount of electricity is available.

Product images

Cadillock ClassicCadillock Classic - Package contents

Installation

The Cadillock Classic can be installed in just three steps and is particularly easy and cost-effective. Only a wrench and a few minutes’ time are needed.

The Cadillock Classic is installed directly on the car battery in 3 easy assembly steps: 

  1. Connect the positive cable of the vehicle to the pole of the Cadillock Classic.
  2. Connect the cable of the Cadillock Classic to the positive pole of the car battery with the safety screw.
  3. Connect the ground cable of the Cadillock Classic to the negative pole of the car battery.

Technical data

Function Block Diagram

Cadillock Classic Function Block Diagram

Casing

- SGS-certified, fireproof fiberglass/nylon material by DUPONT
- Water- and dust-resistant according to IP65 (International Protection Ratings)
- Dimensions: L: 139 mm x W: 110 mm x H: 30 mm

Operating voltage

9.5 V ~16 V

Automatic interruption of the voltage

at 11.9 V after 60 seconds

Operational temperature range

The resistance of the internal components is designed for –40 °C to +85 °C.

Storage temperature range

–40 °C to +85 °C

Max. power input

1,000 A

Power consumption

5 ~7 mA  before interruption
3 ~5 mA  after interruption

Continuous current

80 ~100 A

On-state resistance

2 mΩ

Buzzer

110 dB

Red cable

4 AWG; max. temperature 105 °C

Certificates

CE, E24, FCC, RoHS

 

All Cadillock products at a glance

Cadillock Stripes
Cadillock Battwatch
Cadillock Alarm
Cadillock Marine
Cadillock 3000
Cadillock 4000
Cadillock 4000 bike
Cadillock Classic