Cadillock innovative technologies Cadillock innovative technologies
Cadillock 4000 Bike – twice the security: battery monitor with integrated anti-theft device

Cadillock 4000 Bike – twice the security: battery monitor with integrated anti-theft device

  • Protects against a complete discharge of the motorcycle battery and thus against battery breakdowns
  • Anti-theft protection caused by electronic immobiliser
  • Interrupts the power supply if the charge level of the battery is dangerously low
  • Keeps enough energy in reserve to start the engine at any time
  • Also suitable when the motorcycle is parked for longer periods
  • Increases the lifespan of the battery
  • Easy to use – installation on the motorcycle battery in only 3 assembly steps
  • No interference with the vehicle’s electronics
  • Can be combined with already installed alarm systems
  • Extremely low power consumption (only 2 ~ 3 mA)
  • versandkostenfrei
  • für Deuschland
Lieferbar ab 04.08.

Short description

With its patented digital monitoring system, the Cadillock 4000 Bike constantly checks the minimum voltage level that the vehicle battery must maintain to be able to start the motorcycle. As soon as the voltage has fallen short of 11.9 V for a period of more than 60 seconds, the Cadillock 4000 Bike automatically interrupts the vehicle power supply.

Thus the Cadillock 4000 Bike protects your vehicle's battery from falling to a dangerously low state of charge or even being completely discharged, and reserves the necessary battery energy for an engine emergency start. Thus the Cadillock 4000 Bike prevents your vehicle not being able to be started due to a flat battery. 

By interrupting the power supply by the Cadillock 4000 Bike the status of the motorcycle battery is very similar to the state that would be achieved by disconnecting the motorcycle battery. The electrical current is shut off.

The anti-theft device is activated by remote control. The Cadillock 4000 Bike with its patented circuit configuration separates the battery power supply, thus making it impossible to start the vehicle.  

Installation

There is no interference with the vehicle’s electronics during the installation of the Cadillock 4000 Bike. 

The Cadillock 4000 Bike can be installed in just three steps and is particularly easy and cost-effective. Only a wrench and a few minutes’ time are needed.

The Cadillock 4000 Bike is installed directly on the motorcycle battery in 3 easy assembly steps: 

  1. Connect the positive cable of the vehicle to the pole of the Cadillock 4000 Bike.
  2. Connect the battery clamp of the Cadillock 4000 Bike to the positive pole of the motorcycle battery.
  3. Connect the ground cable of the Cadillock 4000 Bike to the negative pole of the motorcycle battery.

All Cadillock products at a glance

Cadillock Stripes
Cadillock Battwatch
Cadillock Alarm
Cadillock Marine
Cadillock 3000
Cadillock 4000
Cadillock 4000 bike
Cadillock Classic